ALU-60 T&G Aluminum Double Swing Gate includes:
- 22 T&G ALU-60 Boards: 66” x 3/4” x 6” (tongue & groove construction for seamless assembly)
- 2 Side Posts: Required for pivot hinge operation
- 2 Universal Gate Frames: 6’ x 6’ size, engineered for stability and versatility
- L-Stopper: Keeps the gate secure when closed
- Gap Cover: Ensures a clean, modern finish
- Pivot Hinges: Heavy-duty top and bottom bearings for smooth operation
- Flat Caps: For a sleek, modern look
- Screws: All necessary stainless steel hardware for assembly
ALU-60 Key Features:
- Universal Gate DIY Kit: This versatile kit fits all AluGlobus designs, including vinyl, composite, aluminum, and wood-look aluminum. It also allows you to use your own materials, provided they meet the engineering specs for gate stability.
- Pivot Hinge System: Equipped with heavy-duty top and bottom bearings, the pivot hinge system ensures smooth and reliable operation, built for long-term durability.
- Powder-Coated Finish: The sleek black powder-coating offers rust resistance, low maintenance, and enhanced weather protection.
- Deadbolt + Handle Ready (Optional): The frame is pre-configured for an optional deadbolt and handle set, ensuring easy upgrades for added security.
- Available in contractor line: HD USA 4” 45 degree Frame ( additional cost ) Basic Assembly Guide:
Double Gate hardware and parts
ALU-60 Tongue & Groove Aluminum Double Swing Gate Kit
The ALU-60 Tongue & Groove Aluminum Double Swing Gate Kit combines modern design, heavy-duty construction, and DIY-friendly assembly in one universal solution. Perfect for both contractors and homeowners, this premium gate kit delivers long-lasting performance without compromising on style.
Crafted from 6063-T6 powder-coated aluminum, the ALU-60 T&G Gate is built to withstand harsh weather, daily use, and the test of time — all while maintaining its sleek, contemporary appearance. The tongue and groove design creates a seamless finish, reducing visible gaps for a clean, high-end look.
Whether you’re upgrading a residential driveway or securing a commercial property, this gate kit offers:
-
Heavy-duty durability for long-term reliability.
-
Universal compatibility with vinyl, aluminum, composite, or wood-look materials.
-
Smooth pivot hinge system for effortless operation.
-
DIY assembly with all hardware included for quick installation.
Transform your property with the ALU-60 T&G Double Swing Gate Kit — a perfect balance of strength, style, and simplicity. Contact us at aluglobusfence.com for wholesale pricing, contractor options, or customization details.
Why Choose ALU-60 Gates?
Durable Materials
6063-T6 aluminum ensures heavy-duty strength.
Modern Design
Clean, horizontal lines add curb appeal to any property.
Universal Compatibility
Supports various materials, including vinyl, aluminum, and composite.
DIY-Friendly
Kit includes everything needed for seamless assembly.
ALU-60 T&G Aluminum Double Swing Gate – Universal DIY Kit
Experience the versatility and durability of the ALU-60 T&G Double Swing Gate Kit. Made with 6063-T6 aluminum and designed for seamless assembly, this modern gate is perfect for any property. Compatible with various materials like vinyl, composite, and aluminum, it’s a universal solution for both residential and commercial spaces. Featuring a sleek powder-coated finish, pivot hinges, and DIY-friendly components, this kit makes installation quick and hassle-free.
Upgrade your property with the ultimate universal gate kit today! Visit aluglobusfence.com for more details.
Do you want to buy?
Pro Tips for a Smooth Installation:
• Avoid scratches by handling materials carefully and keeping the workspace clean.
• Cover all elements during assembly to minimize the need for touch-ups.
INSTRUCTIONS
-
Set up a clean, level workspace free from debris.
-
Protect all aluminum components with plastic wrap or padding to prevent scratches during assembly.
-
Gather necessary tools: drill, level, tape measure, rubber mallet, and safety equipment.
-
Measure your gate opening precisely before cutting.
-
Trim vertical posts or boards to size as needed, ensuring all cuts are clean and square for perfect alignment.
-
Position the tongue and groove ALU-60 boards within the gate frame.
-
Lock each board into place, ensuring a tight, seamless fit to enhance stability and appearance.
-
Fit gap covers or decorative trims over exposed sections to create a sleek, modern finish.
-
Secure with provided stainless steel screws for corrosion resistance.
-
Attach pivot hinges to the side posts, aligning them for smooth, even swing motion.
-
Install the L-stopper to keep gates firmly closed when not in use.
-
Lift the assembled gate into position and secure it to the hinges.
-
Check alignment and adjust hinge tension if necessary.
-
Tighten all fasteners, ensuring there is no movement in the frame.
-
Test the gate for smooth, quiet operation.
-
Apply a final cleaning to remove fingerprints or debris before use.
FAQ
What makes the ALU-60 T&G Double Swing Gate Kit better than wood or vinyl gates?
Unlike wood, which can warp, crack, or require frequent painting, and vinyl, which may fade or become brittle, the ALU-60 T&G Gate Kit is built from 6063-T6 powder-coated aluminum. This ensures exceptional strength, rust resistance, and low maintenance while providing a modern, high-end appearance that lasts for years.
Can I install the ALU-60 T&G Double Swing Gate Kit myself?
Yes. This gate kit is designed for DIY-friendly installation and comes with all required hardware, pivot hinges, and tongue & groove aluminum boards. Most homeowners with basic tools can assemble it in a day, while contractors can install it even faster.
Is this aluminum gate suitable for high-traffic areas?
Absolutely. The heavy-duty aluminum frame, reinforced tongue & groove construction, and precision-engineered pivot hinges make it ideal for both residential driveways and commercial properties with frequent use.
Does the ALU-60 T&G Double Swing Gate provide privacy?
Yes. The tongue and groove panels create a solid, gap-free surface, offering complete privacy while maintaining a sleek, modern look.
Can I customize the size or finish of this gate?
Yes. While the standard size is 6′ x 6′ per panel, custom dimensions and powder-coat colors are available for special orders or contractor projects.
Unlike wood, which can warp, crack, or require frequent painting, and vinyl, which may fade or become brittle, the ALU-60 T&G Gate Kit is built from 6063-T6 powder-coated aluminum. This ensures exceptional strength, rust resistance, and low maintenance while providing a modern, high-end appearance that lasts for years.
Yes. This gate kit is designed for DIY-friendly installation and comes with all required hardware, pivot hinges, and tongue & groove aluminum boards. Most homeowners with basic tools can assemble it in a day, while contractors can install it even faster.
Absolutely. The heavy-duty aluminum frame, reinforced tongue & groove construction, and precision-engineered pivot hinges make it ideal for both residential driveways and commercial properties with frequent use.
Yes. The tongue and groove panels create a solid, gap-free surface, offering complete privacy while maintaining a sleek, modern look.
Yes. While the standard size is 6′ x 6′ per panel, custom dimensions and powder-coat colors are available for special orders or contractor projects.
You May Also Like
- ALU60 TNG Double Swing DIY Gate Kit 3
- ALU60 TNG DIY Gate Kit 6×6 (Pedestrian Single Swing)
- ALU60 HD Sliding Gate Kit 18×6 (Driveway Gate)
- ALU60 TNG DIY Gate Kit 4×6 (Horizontal)
- ALU60 HD Sliding Gate Kit 18×6 (Alternate Listing)
- ALU60 Slat Fence Panel Kit
- ALU60 HD Double Swing Gate Kit (Horizontal)
- ALU60 Horizontal Gate Kit 4×6
