Product
| Product Name | Aluminum Gate Kit Profile60 T&G Contractor Line 12′ × 6′ Sliding 1/2″ Gap |
|---|---|
| Product Type | Contractor-grade aluminum sliding gate system |
| Series | Profile60 T&G Contractor Line |
| Configuration | Sliding gate with 1/2″ gap tongue-and-groove slat system |
| Primary Use | Residential, multi-unit, and light commercial driveway or access gate |
Size & Configuration
| Gate Size | 12 ft width × 6 ft height |
|---|---|
| Gate Opening | Designed for a 12′ clear opening with required side clearance for slide travel |
| Gate Layout | Track-guided sliding configuration for smooth lateral movement |
| Frame System | 20′ heavy-duty outer frame paired with 12′ HD inner gate frame |
| Project Fit | Ideal for residential driveways, multi-unit developments, light commercial properties, and modern architectural projects |
Material & Finish
| Material | USA-made high-grade aluminum |
|---|---|
| Outer Frame | 20′ Gate Frame – 4″ HD USA Aluminum |
| Inner Gate Frame | 12′ HD Gate Frame – 2″ × 4″ |
| Slat Type | ALU60 tongue-and-groove black aluminum slats – 6′ |
| Finish | Black fade-resistant powder-coated finish |
| Surface Protection | Resists rust, corrosion, moisture, oxidation, and environmental wear |
Structural Performance
| Rigidity | Reinforced frame system engineered for maximum rigidity and structural precision |
|---|---|
| Twist Resistance | Resists warping or twisting over time |
| Fatigue Resistance | Designed to resist structural fatigue from repeated operation |
| Alignment Stability | Internal connectors, reinforced corner brackets, and integrated channel components maintain long-term alignment |
| Tracking Performance | Supports smooth tracking performance during frequent residential and light commercial use |
| Sag Resistance | Resists structural sag over time in high-use environments |
Profile60 T&G Design with 1/2" Gap
| Slat System | ALU60 tongue-and-groove aluminum slats |
|---|---|
| Gap Spacing | 1/2-inch spacing between slats |
| Privacy | Provides balanced privacy with controlled airflow |
| Wind Performance | Reduces wind resistance compared to fully solid panels |
| Architectural Style | Creates a bold horizontal architectural aesthetic with clean linear symmetry |
| Color Retention | Fade-resistant powder coat maintains long-lasting color and professional appearance |
Smooth Sliding Operation
| Operation Type | Consistent, controlled track-based sliding movement |
|---|---|
| Rolling Hardware | Heavy-duty rolling hardware designed to prevent derailment and uneven wear |
| Daily Use | Supports frequent residential use and light commercial traffic |
| Performance Benefit | Maintains smooth glide performance without compromising structural reliability |
| Best Fit | Ideal for properties with limited driveway depth or required side-room sliding clearance |
Gate Kit Includes
| Outer Frame | 20′ Gate Frame – 4″ HD USA Aluminum |
|---|---|
| Inner Frame | 12′ HD Gate Frame – 2″ × 4″ |
| Corner Brackets | Inner corner brackets |
| Connectors | Inner connectors |
| Channel Kit | Channel kit |
| C-Truck | C-truck – 2-1/8″ |
| C-Wheels | Pair of C-wheels – 2-1/2″ |
| Guide Roller | 6″ guide roller |
| Gate Catcher | Gate catcher |
| Gate Stopper | Gate stopper |
| Fasteners | #10 × 3/4″ screws and #12 × 2″ black screws |
| Slats | ALU60 T&G Black Aluminum Slats – 6′ |
Automation-Ready Design
| Motor Bracket | Includes a U-bracket for sliding gate motors |
|---|---|
| Mounting Hardware | Includes 3-1/2″ mounting screws |
| Automation Compatibility | Integrates with most residential and light-commercial sliding gate operators |
| System Advantage | Ideal for automated driveway access systems |
Post Compatibility Options
| Compatible Post Sizes | 2″, 2.75″, and 2″ × 3″ aluminum posts |
|---|---|
| Selection Guidance | Post selection should be based on gate weight, wind load, and automation requirements |
| Support Goal | Ensures optimal structural support for the system |
Built for Strength & Longevity
| Moisture Resistance | Resists moisture and oxidation |
|---|---|
| Sag Protection | Resists structural sag over time |
| UV Resistance | Resists color fading from UV exposure |
| Performance Stability | Resists degradation under frequent operation |
| Contractor Reinforcement | Contractor-grade reinforcement ensures dependable function in high-use environments |
Applications
| Residential | Residential driveway entrances and private gated access points |
|---|---|
| Multi-Unit | Gated communities and multi-unit developments |
| Commercial | Light commercial facilities and contractor-grade access systems |
| Architectural Projects | Modern architectural builds requiring clean horizontal styling |
| Clearance Requirement | Ideal for properties requiring side-room sliding clearance |
Installation & Compatibility
| Installation Type | DIY-ready modular system designed for efficient installation without welding |
|---|---|
| Opening Check | Confirm a 12′ clear opening with adequate side clearance for slide travel |
| Post Setup | Ensure posts are plumb and securely anchored |
| Ground Preparation | Install track and rolling hardware on level ground |
| Guide Roller Alignment | Align guide roller to prevent lateral movement |
| Motion Test | Test glide motion before securing automation components |
| Field Adjustability | Modular frame design allows field adjustments to reduce jobsite delays and installation time |
Recommended Tools
| Tools Required | Level, tape measure, drill, socket set, and standard safety equipment |
|---|
Maintenance
| Performance Level | Low-maintenance contractor-grade outdoor gate system |
|---|---|
| Long-Term Use | Built for dependable long-term performance in demanding environments |
Why Choose Globus Gates
| Manufacturing Focus | Professional-grade aluminum gate systems engineered for durability and visual precision |
|---|---|
| Reliability | Designed for long-term structural reliability and smooth operation |
| Market Trust | Trusted across Los Angeles and beyond by builders, installers, and property owners |
| Design Standard | Combines structural integrity with modern architectural appeal |
| Long-Term Value | Built to perform for years with dependable contractor-grade function |
Built for DIY - Installed in Minutes
See how our universal gate system goes together quickly and cleanly
One System. Endless Compatibility
Frame adjusts to fit multiple gate sizes, styles, and lock setups right on the spot.
Engineered for Strength & Durability
From 6063-T6 aluminum to AAMA-2604 powder coating, rust-free, weather-ready
The Profile60 T&G Contractor Line 12′ × 6′ Aluminum Sliding Gate Kit with 1/2″ Gap is a contractor-grade sliding gate system engineered for high-use environments where structural strength, consistent performance, and modern architectural design are required. Built from USA-made aluminum, this system is designed to support frequent operation while maintaining long-term durability and visual precision.
Contractor-Grade Aluminum Construction
The gate system is built around a 20-foot, 4-inch heavy-duty aluminum frame, paired with a 12-foot HD 2″ × 4″ gate frame to support frequent use and automation loads. Manufactured from high-quality aluminum, the structure resists corrosion, warping, and fatigue, even in demanding outdoor conditions.
Inner connectors, corner brackets, and channel components reinforce the frame, helping maintain alignment and smooth movement over time.
Profile60 T&G Design with 1/2″ Gap
This sliding gate features ALU60 tongue-and-groove aluminum slats in a black powder-coated finish, configured with a 1/2-inch gap between panels. The design balances privacy and airflow while delivering a bold horizontal profile commonly specified in modern and contractor-installed fencing system
Smooth Sliding Operation
The sliding system is engineered for stability and controlled motion. Heavy-duty rolling components guide the gate smoothly along the track while preventing derailment and uneven movement. This configuration supports daily use in residential and commercial environments.
Automation-Ready Design
A U-bracket for sliding gate motor, including 3-1/2″ mounting screws, is included to support motorized installations. This allows seamless integration with most sliding gate operators used in residential and light commercial applications.
Low-Maintenance Performance
The aluminum construction eliminates rust and rot, while the powder-coated finish maintains color consistency over time. Routine cleaning and occasional hardware inspection are typically all that is required to keep the gate operating smoothly.
Frequently Asked Questions
What material is the Profile60 T&G 12′ × 6′ Sliding Gate made from?
The gate is constructed from high-grade 6063-T6 aluminum using reinforced Profile60 tongue-and-groove slats and a heavy-duty 4″ aluminum frame, finished with a fade-resistant AAMA-2604 powder coat.
What does the 1/2″ gap design provide?
The 1/2-inch spacing between slats offers a balance of privacy and airflow while maintaining a modern horizontal appearance and reducing wind resistance compared to fully solid panels.
Is this sliding gate compatible with automation systems?
Yes. The system includes a U-bracket for sliding gate motors and is compatible with most residential and light-commercial sliding gate operators.
What maintenance is required?
Very little. The aluminum frame will not rust or rot. Occasional rinsing with mild soap and water, along with periodic hardware inspection, is sufficient to maintain smooth operation.
What type of posts should be used for installation?
The gate is compatible with 2″, 2.75″, and 2″ × 3″ aluminum posts. Post size selection should be based on gate weight, wind exposure, and whether automation will be installed.
