The shorter member of the HD frame family

Heavy duty gates sold by Globus Gates are built around one rectangular 2x4 in. section. Here it comes as a single 12 ft piece, so you can make an unlisted gate size, add a member to an existing HD leaf, or swap out a damaged rail without buying a full frame kit.

Profile data

• Section: 2 x 4 in.
• Cut length: 12 ft
• Wall: .090 in., double walled
• Alloy: 6063-T6
• Coating: AAMA 2604, black
• Intended for: heavy duty swing (pedestrian) gates and heavy duty sliding gates

How it fits the system

In each HD sliding gate package, 20 ft runs of this section are combined with one 12 ft piece, then joined at the corners with brackets and filled through channel kits. The HD pedestrian frame kits use the same 2x4 in. shape.

Other lengths

• 20 ft, .090 in. walls: the main length in HD sliding packages and pedestrian frame kits
• 24 ft, .125 in. walls: the longest option, with heavier walls
• 12 ft, .090 in. walls: this piece, for sliding frames and smaller builds

Assembly hardware

Corners are tied together with the HD L big and HD L small brackets. HD frames are fastened with black #14 x 2 in. stainless screws. Plan your cut list from the real opening first, and talk to Globus Gates before designing an unlisted size.

FAQ

Is this a complete gate frame?

No. It is one 12 ft profile. For a ready set, see the 4x6 HD frame kit.

Can I use it on a sliding gate?

Yes, heavy duty sliding gates are one of its uses.