The trim that finishes a cladding wall

This 2-piece L-shape trim covers exposed edges, outside corners and transitions on aluminum cladding, inside or outside, on homes or commercial buildings. Two L-shaped parts lock together: the lower one fastens under the cladding with screws, and the upper one snaps over it for a flush, tight fit that leaves no screw heads showing.

Specifications

• Dimensions: 7/8 in. by 7/8 in. by 1-3/8 in.
• Length: 228 in.
• Construction: two interlocking L pieces
• Material: powder coated aluminum
• Colors: Black, IPE, Teak, Walnut, White Oak

Benefits on the job

• Hides cuts and small imperfections at corners
• Shields edges from knocks and wear
• Will not rust and needs no painting
• Light and easy to cut
• Finishes match the cladding for one consistent look

Installation sequence

• Clean and line up the edges and corners.
• Screw the base piece in position, level and true.
• Fit and align the cladding panels against it.
• Click the cover piece over the base until it locks.
• Check that every run is straight and trim ends as needed.

FAQ

Which cladding does it work with?

It is made for CLAD100 and CLAD120 and suits most other aluminum cladding.

Does it need maintenance?

Very little. The powder coat resists fading and weather.

Can I use it indoors?

Yes, interior and exterior uses are both suitable.