Learning Center: Aluminum Fence Kit Profile20 SLAT 6 ′ × 6 ′ 6′×6′ Horizontal Black 1 / 2 1/2″ Gap Explained

Product Overview

What the Profile20 SLAT kit is

The Profile20 SLAT kit is a pre engineered aluminum panel system designed for 6 × 6 panels in a horizontal layout finished in black. The system uses a specific slat profile that creates a clean linear appearance and a precise 1/2 inch gap between slats for controlled sightlines and airflow. The kit typically bundles panels, rails, posts, and fasteners so installers avoid complex part sourcing. Benefits include corrosion resistance, light weight for easier handling, and a consistent powder coat finish that minimizes painting. The design suits residential and light commercial borders where a modern, low maintenance barrier is desired. The next chapters cover exact specs, tools, and step by step assembly so installers reach a secure and level result.

Features and Specifications

Key specifications that matter

• Material Aluminum alloy with a durable powder coat for corrosion resistance.
• Panel size 6 × 6 nominal panels with horizontal Profile20 slats.
• Slat gap 1/2 inch consistent spacing for ventilation and partial privacy.
• Finish Matte or satin black powder coat rated for outdoor exposure.
• Hardware Stainless or coated fasteners and brackets included for standard kits.

These specs reduce long term upkeep and simplify installation because panels arrive pre sized and hardware is matched. Confirm local code related to heights and spacing before purchase. Use this chapter to check fit and compatibility with gates, posts, and landscape features. Validate post embed depth and recommended concrete volume for your soil conditions to ensure structural performance.

Tools and Pre Installation Prep

Prepare the site and tools

Gather tools and verify components before you dig. Common tools include a level, tape measure, string line, post hole digger or auger, concrete, a drill with driver bits, torque wrench, and a rubber mallet. Confirm kit contents: posts, rails, slats, brackets, caps, and fasteners. Mark fence line and measure exact post spacing per kit recommendations. Check for underground utilities and call before you dig. Ensure posts are set plumb and at correct embed depth to prevent sway. Pre cutting is rarely required with a proper kit. Lay out panels on protective surface to avoid scratching the powder coat. A clean prep stage shortens install time and yields straight, even panels.

Step by Step Installation Guide

Follow these steps for a reliable install

• 1 Mark post centers and dig holes to recommended depth based on frost and load conditions.
• 2 Place posts in holes and check plumb; pour concrete and brace until set.
• 3 Attach horizontal rails to posts at specified heights using supplied brackets.
• 4 Slide Profile20 slats into rails allowing a 1/2 inch gap between slats; verify spacing with a spacer tool.
• 5 Secure slats and rails with supplied fasteners; torque to spec but avoid over tightening.
• 6 Install post caps and walk the line to check level and alignment.

Using a kit that bundles correctly sized parts speeds this process. The included installation guide and clarity of components reduce decision time and common errors. If adjustments are needed, loosen fasteners, realign, and resecure for a uniform finish.

Usage and Maintenance Tips

Keep the fence performing longer

Routine care keeps the aluminum kit looking new. Inspect fasteners and brackets seasonally and after storms. Tighten loose hardware and replace any damaged clips promptly. Clean the powder coat finish with mild soap and water to remove dirt and salts. Avoid abrasive cleaners that can damage the finish. Trim landscape growth away from panels to prevent rubbing. For coastal installations, rinse more often to remove salt deposits. Check for settlement at footings and re level rails if small shifts occur. These practices reduce corrosion risk and maintain the intended 1/2 inch gap spacing and overall visual consistency.

Sourcing Warranty and Next Steps

Where to buy and what support you get

Choose a supplier that provides a complete kit, clear installation instructions, and responsive support. A quality vendor offers matched hardware, replacement parts, and installation guidance to resolve issues quickly. Typical benefits include reduced install time, consistent fit, and warranty coverage on the powder coat and structural components. For a ready to order kit with parts, instructions, and support that solves common installation hurdles and speeds project completion, visit Globus Gates shop to review available Profile20 SLAT kits and accessory options.

Final words

The Profile20 SLAT 6×6 horizontal aluminum fence kit offers a clean modern look with a controlled 1/2 inch gap for airflow and privacy. Proper preparation, the right tools, and step by step installation ensure a secure, low maintenance fence. Regular inspections and simple upkeep extend service life. Choose a complete kit and support to save time and ensure a professional outcome.

Frequently Asked Questions