Aluminum Fence Kit Profile20 SLAT 6′ x 6′ Horizontal Black 1/2″ GAP: Learning Guide
This learning article explains what the Profile20 SLAT 6′ x 6′ Horizontal Black fence kit is, what comes in the box, and how to install and maintain it for long-term performance.
Product page:
Aluminum Fence Kit Profile20 SLAT 6′ x 6′ Horizontal Black 1/2″ GAP.
Product overview and use cases
Overview
The ALU20 / Profile20 SLAT 6′ x 6′ Horizontal Fence Kit is a modern horizontal-slat fence panel system designed to deliver a consistent, minimalist look with semi-privacy thanks to its 1/2″ gap spacing.
It’s commonly used for backyard boundaries, patio privacy screens, pool environments, and contemporary landscape layouts where you want airflow while still reducing sightlines.
Because aluminum won’t warp or rot like wood, this style is often chosen for long-term exterior projects where stable alignment and low maintenance matter.
Features, specifications, and materials
Key features
- Horizontal ALU20/Profile20 aluminum slats with a consistent 1/2″ gap for a uniform modern appearance.
- Black powder-coated components designed for exterior durability, including AAMA-2604 powder coating called out for weather readiness.
- Material spec notes include 6063-T6 aluminum, which is commonly used for strong, corrosion-resistant extrusions.
- Kit concept includes the core fence components and installation hardware so a DIYer or contractor can assemble the panel without sourcing misc. fasteners separately.
What’s included
- ALU20/Profile20 horizontal aluminum slats (black finish).
- Reinforced post system referenced as a 6×6 aluminum post structure for strength and stability.
- Rails, brackets, and corrosion-resistant/powder-coated components intended for long-term outdoor use.
- Complete installation hardware (DIY-ready).
Step-by-step installation guide
Installation steps
- Confirm your layout and measurements: posts should be secure, plumb, and spaced correctly for a 6 ft panel before you start.
- Stage your workspace: lay out slats, frame components, and hardware on a clean flat surface to prevent scratches and missing parts.
- Prep tools: have a level, tape measure, drill, and basic safety gear ready for efficient assembly.
- Assemble the frame on a flat surface: build top/bottom/side frame pieces, keep corners square, and tighten hardware evenly to hold alignment.
- Install slats from bottom to top: seat each slat fully and keep the designed 1/2″ gap consistent as you work upward.
- Final checks: verify the panel is square and level, then tighten fasteners as needed and clean off fingerprints/dust.
Best practices for usage and maintenance
Usage and care
- Clean with mild soap and water; avoid harsh abrasives that can dull the finish over time.
- Do a yearly inspection: check hardware tightness and confirm the panel remains level and visually consistent.
- Skip repainting: the kit is positioned as “ready to enjoy” without painting, staining, or sealing.
- In dusty areas, a quick rinse is typically enough to keep the black finish looking crisp.
Troubleshooting common issues and parts
Troubleshooting
- Uneven gaps: If spacing varies, re-seat slats fully and re-check squareness/level before fully tightening the frame fasteners.
- Panel looks out of level: Re-check that posts are plumb and that the panel was assembled square on a flat surface prior to mounting.
- Loose feel or rattle: Inspect all fasteners and connections, then tighten evenly to restore rigidity.
- Scratches from install: Prevent this by staging parts on a clean work surface and keeping slats separated during layout.
Buying options, support, and next steps
If you’re planning a full run, measure your total linear footage and map post locations first so each 6′ panel stays consistent across corners and transitions.
For compatible products, additional fence styles, and ordering support, visit:
https://globusgates.com/shop/.
Final words
The Profile20 SLAT 6′ x 6′ Horizontal Black fence kit with 1/2″ gap is a clean, modern option when you want semi-privacy, airflow, and a low-maintenance aluminum build that holds its lines over time.
Follow a square-and-level assembly process, keep spacing consistent, and do simple annual checks to protect the look and performance for years.
Frequently Asked Questions
It’s presented as a complete fence panel kit, including the horizontal aluminum slats and the necessary components/hardware for installation and assembly.
Yes, it’s positioned as a DIY-friendly kit intended to simplify the build process versus sourcing parts separately.
The 1/2″ gap refers to the spacing between slats, giving a semi-privacy look while still allowing airflow and light through the panel.
The product references 6063-T6 aluminum, commonly used for exterior applications due to durability and corrosion resistance.
Use mild soap and water for cleaning, avoid abrasive cleaners, and periodically inspect hardware/fasteners to keep everything tight and aligned.
