#10 x 3/4 in. Slat ScrewAluminum fences
$0.41View
Highlights
- 2.75 x 2.75 in. square, 11 ft long
- Channels on two opposite faces
- Cuts with a non-ferrous blade
- Caps and brackets are bought separately
- 7-stage AAMA 2604 powder coat
- Non-combustible aluminum, Zone Zero ready
Made for in-line posts
In a straight run, each intermediate post holds a panel on its left and another on its right. The 2.75 in. 2-Way Post 11 ft – Black does exactly that, with two channels set opposite each other. Its 11 ft length leaves plenty of post to set in the ground and still clear a tall fence.
Specs
- Profile: 2.75 in. square
- Length: 11 ft
- Layout: 2-way, panels on opposite sides
- Finish: AAMA 2604 super-durable coat, black
- Alloy: 6063-T6 architectural aluminum
- You receive: one post
Good fits
Privacy and boundary fences at home, enclosures around pools and patios, commercial jobs, long runs with even panel spacing, and coastal or damp sites where steel would rust.
Setting the post
- Stake out the fence line and mark each post spot.
- Dig to roughly 2 ft, or deeper if your soil and local rules require it.
- Put gravel in the bottom so water drains.
- Stand the post in the hole and check plumb on two faces.
- Pour concrete and give it 24 to 48 hours to cure.
- Slide panels into both channels once the post is firm.
FAQ
Can I shorten it?
Yes, with a blade made for non-ferrous metal.
Is it suitable for commercial work?
Yes, it is used on both home and commercial fences.
What upkeep does it need?
An occasional wash. Aluminum does not rust, and the coating resists fading and chipping.
Reviews
Bought this? Write the first review
Complete the project
#10 x 3/4 in. Slat Screw
2.75 in. 2-Way Post Spacer 1/4 in. – BlackAluminum fences
$0.66View
2.75 in. 2-Way Post Base Plate – BlackAluminum fences
$29.15View
C-Channel Kit 8 ft – BlackAluminum fences
$34.82View
