A wide slider planned as one system

Many gate headaches trace back to planning: choosing a swing gate where a slider belongs, too little side space, weak framing or hardware bought piecemeal. This Profile 20 kit groups the frame, slats, rolling gear, guides, stops and fasteners so an 18 ft leaf can be planned as one moving assembly. The horizontal slats leave open spacing for partial privacy with airflow and some visibility.

Kit contents

• 20 ft perimeter frame in 4 in. HD USA aluminum
• 12 ft secondary member, 2x4 in. heavy duty
• Inner corner brackets for reinforcement
• Profile 20 HD USA slats
• C wheels for a ground track, plus an upper guide roller
• Catcher and stoppers
• Post, cap and fasteners
• U bracket for a future motor

Specifications

• Size: 18 ft wide x 6 ft high
• Alloy: extruded 6063-T6
• Finish: exterior powder coat, color options available
• Post sizes: 3, 4 or 6 in.
• Substrate: non-combustible aluminum

Site planning

Leave clear side runback for the whole leaf, its tail, the guide, stopper and any operator. Track foundation, post rigidity, wheel placement, wind exposure and grade should be coordinated before any concrete is poured. Select an operator, power, safety devices and emergency access that suit the finished gate.

FAQ

Is it fully private?

No. The slat spacing gives partial privacy and lets air through.

Is it suitable for Zone 0?

Aluminum is non-combustible, but whether the finished gate qualifies depends on the whole setup, nearby materials and local rules.