Privacy first

Standard slat fences leave deliberate spaces between boards. The Profile 50 T&G Fence Kit 6 ft W x 6.3 ft H does not: its profiles lock together as you stack them, so the panel reads as one continuous face. It is a good match for property lines, backyard enclosures, garden and patio edges, and modern homes that want a clean horizontal look. Light commercial sites such as offices and multifamily areas use it too.

Specs

• Panel: 6 ft W x 6.3 ft H
• System: Profile 50 T&G, horizontal
• Material: 6063-T6 aluminum
• Privacy: gap-free
• Finish: AAMA 2604 powder coat

Built to last outdoors

Aluminum does not form iron rust, the powder coat protects against sun and weather, and the material is non-combustible. The interlock also adds stiffness across neighboring profiles. For sound reduction or wind-load figures, ask our team for details.

Installation steps

1. Mark the run, post spots, corners, ends, slopes and any gates.
2. Set posts plumb using the footing design your site needs.
3. Level the first profile carefully; it guides the rest.
4. Seat each profile fully into the one below.
5. Finish connections and check plumb, top line and alignment.

Before you start, confirm the post layout, mounting method, slope, how windy the site is, and local structural rules. Contractors and experienced DIYers can handle the work.

FAQ

Can it go around a pool?

It can be considered if the full barrier, gates and hardware meet local rules.

Do I need to set a gap between boards?

No, the interlock sets the spacing for you.