How a cane bolt works

This hardware is a sliding metal rod mounted on the inside face of a gate or door. Lower it and the tip seats in a hole or small socket in the ground, pinning that leaf in place. On a double gate, one side stays fixed while the other opens for everyday use. The Basic Cane bolt keeps that job simple, with no complicated mechanism.

Why it helps

• Stops the fixed leaf from moving, which eases strain on hinges
• Firms up the whole entrance by locking one side
• Easy for anyone to operate
• Needs little maintenance

Material

The bolt is coated metal, protected against rust and corrosion in rain and humidity. Brackets hold the rod in line for smooth travel.

Where to fit one

• Garden, backyard and driveway double gates
• The fixed leaf of French or patio doors
• Shops, offices and storage units
• Heavier gates on industrial sites

Installation

Choose the mounting spot, mark and pre-drill the screw holes, then attach the brackets. Install the ground socket directly under the rod and test that it slides freely. Basic tools are all you need.

FAQ

How do I keep it working smoothly?

Wipe it clean, add a little light oil when needed and check the screws stay tight.

What if the ground shifts?

Recheck that the rod still drops cleanly into the socket.