ALU50ALU 50 T&G Slat 6 ft – Teak-Ipe Wood Grain
ALU 40 Fence Slat Box 8 ft – 16 Pack
Order one box per fence section and every slat arrives together in the same finish. Its 16 Alu 40 slats, each 8 ft, fill a 6 ft tall, 8 ft wide DIY section.
- 16 slats per box, 8 ft each
- 4 x 0.75 in. profile, 0.047 in. wall
- Minimum gap of 3/8 in.
- 6063-T6 aluminum, AAMA 2604 coat
- Black, Bronze or White
- 7-stage AAMA 2604 powder coat
- Non-combustible aluminum, Zone Zero ready
$600.86
Send a photo of your opening. We reply with one price for the kit, delivery and install, or call (424) 522-2143.
One box, one section
Counting slats one by one gets tedious on a long run. This box holds the sixteen Alu 40 slats a single 6 ft by 8 ft DIY section calls for, so repeating identical sections is just a matter of ordering one box per bay.
Slat details
- Face and depth: 4 x 0.75 in.
- Wall: 0.047 in.
- Length: 8 ft
- Count: 16
- Powder coat: AAMA 2604 super-durable
- Alloy: 6063-T6
- Smallest recommended gap: 3/8 in.
The wide face gives calm horizontal bands. Aluminum will not rot or warp, and a wash with water and mild cleaner is all the finish needs.
Parts you add
The box is slats only. Each section also needs a post kit for the 2.75 2-way system (post, L-brackets, bottom spacers and press cap) and a spacer pack to set the gap. Half inch spacers give a slightly more open look than the 3/8 in. minimum. Prefer one order line per section? The Alu 40 8x6 fence kit bundles this box with a post kit and 1/2 in. spacers.
Planning tips
- Settle how many sections, where posts go and which gap you want before ordering.
- Remember an extra post to start each run, plus one at every end and gate opening.
- Globus Gates can double check layouts that include corners, ends or gates.
FAQ
Box or single slats?
Choose the box for new sections and single slats for repairs or short runs.
Are posts included?
No, posts come in the separate 2-way post kit.
Installation
Measure the opening and check what the product mounts to.
Assemble the pre-cut parts with the included hardware. No welding.
Set, level and fasten, then fit any lock or accessories.
Rather not do it yourself? Our crew installs across Southern California.
Get an install quoteMore photos




Complete the project
ALU50ALU 50 T&G Slat 6 ft – Teak-Ipe Wood Grain
2.75 in. 2-Way Post Base Spacer 2 in. with Screws – Black
3/8 x 3-3/4 in. Wedge Anchor
ALU60ALU 60 T&G 2-Way Post Fence Kit 8 ft W x 6 ft H – 1/2 in. Gap
Reviews
There are no reviews yet.