L-Stopper 6 ft
Highlights
- 8 ft long, 2×2 in. section
- Wall mounting only
- Cap, baseplate and striker plates included
- 6063-T6 aluminum, black AAMA 2604 coat
- Non-combustible aluminum, Zone Zero ready
A taller post for the hinge
This boxed hinge post is a pedestrian gate post that attaches to a wall. The 8 ft length helps where the masonry climbs higher than the gate and the post should run up with it, or when a taller gate calls for a longer hinge post. More post along the wall also means more surface for fastening.
Box contents
- Post cap, supplied with screws
- Baseplate, plus your choice of a 3/8 x 3 in. anchor bolt or a 3/8 x 3 in. hex head wood screw
- Screws to fix the baseplate to the post
- Striker plates with their screws and brackets
The contents match the shorter version, so nothing extra is needed for installation.
6 ft or 8 ft?
Apart from length, this post and its 6 ft sibling are identical. The L-Side Post comes in 6 ft only, so for an 8 ft pair, ask Globus Gates about options first.
Installation notes
- Fix to a wall only. It is not meant for a concrete footing.
- Choose the anchor bolt for masonry or the wood screw for timber.
- Work to the supplied instructions and your local building code.
Aluminum resists rot and rust, which helps against masonry that stays damp after rain, and the black finish matches our black gate frames.
FAQ
Can it be set in the ground?
No, it is for wall installation.
Which length should I choose?
Share a wall photo and the gate dimensions with Globus Gates for a recommendation.
Reviews
Bought this? Write the first review
Complete the project
L-Stopper 6 ft
Profile 60Profile 60 T&G Heavy-Duty Sliding Gate 12 x 6 ft, No Gap – Black
Profile 40Profile 40 DIY Pedestrian Gate Kit 6 x 6 ft, 3/8 or 1/2 in. Gap – Wood Grain
Profile 20Profile 20 Contractor Line Sliding Gate Kit 12 x 6 ft
Reviews
There are no reviews yet.