Profile 40Profile 40 Fence Kit 6 x 6 ft, 1/2 in. Gap – Wood Grain
Highlights
- #14 x 2 in., stainless steel
- Specified for 2-way, 3×3 HD and 2×2 in. posts
- Order the exact count you need
- Handy when you extend a fence by one post
Matched to three post types
Globus Gates specifies the #14 x 2 in. Stainless Steel Screw as the fastener for three posts in its fence and gate range:
- 2.75 2-way post: used on fences, wall toppers, and gates that swing or slide.
- 3×3 in. HD square post: for gates that swing or slide, in a footing or on a base plate.
- 2×2 in. post: serves as the hinge side and L-side on DIY walk-through gates.
Quick facts
- Size: #14 x 2 in.
- Material: stainless steel
- Packaging: individual screws
Picking the right fastener
A different black #14 x 2 in. screw exists for HD aluminum gate frames, so check which one your drawing calls for. Base plates going onto concrete take the 3/8 in. x 3-3/4 in. wedge anchor instead of a screw. When in doubt, our team can review the connection with you.
How many to order
Go post by post and count each fastening point, then add a few extras for drops and mistakes. If you tell us the post type and its height, we can check your list before you buy.
Questions people ask
Do these work on HD gate frames?
HD frames use the black #14 x 2 in. screw. These stainless ones are for the posts listed above.
Are they sold in boxes?
No, by the single screw, so you only pay for what you use.
Will they hold a base plate to concrete?
No. Use the wedge anchor for that.
Reviews
Bought this? Write the first review
Complete the project
Profile 40Profile 40 Fence Kit 6 x 6 ft, 1/2 in. Gap – Wood Grain
3 x 3 in. Square Post 6 ft with Screw Bush – Black
Max Rail™ 1.5 Flat Profile 19 ft
Profile 60Profile 60 T&G Slat 18 ft – Ipe Wood Grain
Reviews
There are no reviews yet.